~ RRP $120 ~ Universal Battery Charger of Non-Rechargeables and Rechargeables USB 9V AA AAA C and more Microprocessor-Controlled High-Speed Pulse Charger
Based on tests, the product received EQC certificate
(European Quality Certificate), as award for fulfilment
of above standard qualitative characteristic requirements
in the field of electric appliances.
Automatic, universal microprocessor-controlled high-speed
pulse charger for battery rejuvenation and for charging
of cells with low capacity.
Before use, please read this user’s guide and keep it for later.
Patent No: 201230644215.9
European Quality Certificate
PRODUCT DESCRIPTION
Front view
Back view
PRODUCT FEATURE
Protective glass (lid)
Battery/Cell Charging bays
Battery/Cell Charging Bay 9V
LED indicators of fast and
slow charging status
Switch for fast or slow
charging option
LCD displayer
USB port
Connector of the cable for
power supply
1. Independent Charging Circuits
The 4+1 charging bays are supported by independent charging circuits, guaranteeing
that each charging circuit has adequate current. Regardless of the number of charged
cells/batteries, it makes no difference to the charging current and charging time.
2. Optional Charging Speed
With the optional charging speed switch, users are enabled to choose the charging
speed according to his need and preferences. The charger is embedded with double-
colored LED indicators, green indicating slow charging while red indicating fast
charging. Users can directly observe the present charging speed via the LED indicator.
3. Cell/Battery Capacity and Status Indication
The LCD display screen on the charger indicates respectively the capacity and status of
the five cells/batteries.
(3) Cell/Battery Status Character Indication
1, When cells/batteries are not inserted: Blank (Non-display)
2, When charging is on: Charging (With characters
CHG displayed)
4, damaged cells/batteries are inserted: BAD
Table 2 -LED INDICATION OF OPERATION MODES
Battery
Type Function LED indication LCD
display Bar Graph Status LCD Capacity
Indication Fastcharge Slowcharge
Ni-Cd Discharge N/A N/A DIS 100%, 75%, 50%,25% Flashing downward
Charging Red Green CHA 25%, 50%, 75%, 100% Flashing upward
Fully Charged N/A N/A OK 100% Full Capacity
Ni-MH Charging Red Green CHA 25%, 50%, 75%, 100% Flashing Upward
Fully Charged N/A N/A OK 100% Full Capacity
Li-ion Charging Red Green CHA 25%, 50%, 75%, 100% Flashing Upward
Fully Charged N/A N/A OK 100% Full Capacity
Ni-CD
NI-MH
Li-Ion
Battery
voltage is
verylow
short and
battery can’t
be charged
N/A N/A BAD
4. Multi Chargeable Cell/Batteries Supported
The charger supports a variety of chargeable cells/batteries as follows:
1, AA Cell/Battery: AA Ni-MH, Ni-Cd , Cell/Battery
2, AAA Cell/Battery: AAA Ni-MH, Ni-Cd, Cell/Battery
3, C Cell/Battery: C Ni-MH, Ni-Cd, Li-ion, Cell/Battery
4, D Cell/Battery: D Ni-MH, Ni-Cd, Li-ion, Cell/Battery
5, 3.7V Li-ion Cell/Battery: 18650 Li-ion Cell/Battery and etc. (The Li-ion cells/batteries with
the same voltage and a dimension matching the charging bay are all supported.)
6, 9V Cell/Battery
5. Cell/Battery Types Automatically Identified
The charger can automatically detect the type of inserted cells/batteries and
automatically select the optimal charging management mode. The charging programs
for Ni-MH, Ni-Cd, Li-ion and cells/batteries are all different to avoid inadequate charging
or overcharging resulted from wrong charging programs. Users are free from setting the
cell/battery type via buttons and DIP switches on the charger.
6. Damaged Cells/Batteries Detection and Protection
The charger can automatically detect the condition of cell/battery. If a damaged
cell/battery is inserted, LCD screen will display “BAD” while the corresponding capacity
graph and the charging speed indicator will flash to give an alarm.
In order to prevent the damaged battery from damaging the charger, all the five charging
circuits will be cut until the damaged battery is removed.
7. Repair Function to Internal Short Circuit and Over-discharging Cell/Battery
An internal short circuit, over-charging and other improper use of the cell/battery may
result in the internal damage to the cell/battery. It will bring about an ultra-low voltage in
the cell/battery, and the traditional chargers can’t charge such cells/batteries. The
charger will repair them by consistent trickle charging when such cells/batteries are
detected.
8. USB Charging Function (Support iphone, ipad and high-current charging)
The USB output depends what type and quantity of battery charged. The max USB
output is 3A if no battery is charged. To ensure the fast charging speed on cell or ipad,
we don’t suggest charging batteries with USB port at same time.
9. Multi Protections
Over-voltage protection, Over-current protection, Over-charging protection, Longest
charging time protection, Short circuit protection and Reverse polarity protection
(Structure design)
Instructions
1. Charging:
Step 1: Plug the power adapter to the wall outlet.
Step 2: Plug the round socket output end of the power adapter to the charger.
Step 3: Insert the cell/battery to the charging bays and make sure that you have followed
the correct polarity. The positive pole ( + ) is featured by a fixed metal strip while the
negative pole ( – ) an adjustable spring mental strip.
Step 4: When the LCD displays a full cell/battery capacity and OK, take out the
cell/battery. It will be better if trickle charging is applied for 1-2 hour (s).
2. Charging Speed Switch
Step 1: Take out all the cells/batteries in the charger.
Step 2: Plug the power adaptor to the wall outlet.
Step 3: Plug the round socket output end of the power adapter to the charger.
Step 4: Press the charging speed switch. The initial speed is slow after the charger is on.
The green indicated slow speed while red fast.
Note: If the charger is on, user can take out the cells/batteries and then press directly the
charging speed switch. The charging speed switch can only be used without any
cell/battery in the charger.
2. Charging Current and Time:
Battery Type Battery Size Battery Capacity Charging Current Charging Time
Fast Charging Slow Charging Fast Charging Slow Charging
Ni-Cd
AAA 1000mAh 800mA 400mA 1.5H 3H
AA 2000mAh BOOmA 400mA 3H 6H
C 3000mAh 800mA 400mA 4.5H 9H
o 5000mAh 800mA 400mA 7.5H 15H
Ni-MH
AAA 1000mAh 800mA 400mA 1.5H 3H
AA 2000mAh 800mA 400mA 3H 6H
C 3000mAh 800mA 400mA 4.5H 9H
D 5000mAh 800mA 400mA 7.5H 15H
Li-ion 18650 2000mAh 800mA 400mA 3H 6H
9V 66F6 250mAh N/A 50mA N/A 5.5H
Note: For the Ni-MH, Ni-Cd Cell/Battery, the initial three minutes are CAS Latency (CL)
time and the charging current is 150mA/h.
3. Longest Charging Time (The charging time may vary according the
cell/battery capacity and remaining capacity. The time below only serves
for reference.)
1, 2000mA AANi-MH Cell/Battery
Fast Charging: 2 Hours and 40 Minutes
Slow Charging: 5Hours and 20 Minutes
2, 1000mA AAANi-MH Cell/Battery
Fast Charging: 2 Hours and 40 Minutes
Slow Charging: 5Hours and 20 Minutes
3, 300mA9V Ni-MH Cell/Battery
Around 2 Hours
MANUAL FOR 9V BATTERIES
1. Connect the connector of the cable to the charger and plug the socket to a wall outlet.
Then the charger is ready for battery charging.
2. Insert the 9V cell / battery into the battery charging bay, take care of correct polarity (+, -).
Incorrectly inserted cell will not be charged.
3. After insertion of 9V battery into the battery charging bay, it begin its automatic
charging,Charging is indicated optically by LCD display.
4. The completion of charging process/process of rejuvenation in case of 9V cell/battery
is indicated by LCD display OK.
5. After completion of the process, close the protective glass of the charger (lid) and unplug the
socket plug from the wall outlet.
IMPORTANT NOTICE
• Batteries are not included.
• The cells and batteries charged at the same time must have the same battery chemistry.
• NEVER CHARGE other batteries than of above stated dimensions and battery chemistry – do
not charge for example carbon – zinc batteries, etc!
• NEVER CHARGE corroded cells which are damaged in any way!
• NEVER CHARGE corroded batteries or batteries which are damaged in any way, or which
have not been used for a long time. The batteries could overheat, or it could cause electrolyte
leakage, which could result in damage or destruction of the charger, eventually lead to explosion
and subsequent personal injury or material damage.
• NEVER CHARGE advertising batteries, or batteries which were included in the newly purchased
product, intended as testing. These batteries are usually of lower quality and they could damage
the charger.
• For new NiCd and NiMH cells, 2-3 cycles are needed. (charging, discharging) for optimization
of their performance. If the cells are stored for more than 7 days, charge them always before
their use.
• It is common that the cells and batteries warm up slightly. After they are fully charged and
removed from the charger, the temperature of the cells and batteries gradually sinks to the
room temperature.
• Batteries, which have already been used, should be stored in special boxes, so the new and
old batteries would not mix up, or in order to prevent from undesirable contact of positive and
negative poles.
• The charger is designed to be used in indoor, dry and electrically safe areas.
• Keep the charger clean, free from hair, dust and other dirt.
• Protect the charger from collision, do not put heavy objects on the charger.
• Do not tamper with the charger ever! Any modification or any failure to follow procedures
stated in this manual leading to its damage will void the warranty and the supplier is not
responsible for electrical safety and EMC.
• DO NOT USE extension cables for power supply of the charger, or other kind of connection
which is in conflict with local regulations.
• When charging NiCd cells, the process of charging and discharging will restart in case the
power supply of the charger is interrupted.
• DO NOT short-circuit the cells / batteries.
• NEVER handle the charger with wet hands.
• In case of malfunction, do not attempt to repair the charger and always contact an authorized
service of the supplier or authorized dealer.
• If the device appears to be damaged, please DO NOT USE IT.
• DO NOT INSERT any objects into the charger.
• Extreme cold, heat or humidity can cause permanent damage, destroy, or affect the functionality
of the charger.
• DO NOT USE the charger in areas with strong sunlight.
• The charger can get hot during charging and therefore it should be used only in well ventilated
places, and out of reach of materials sensitive to temperature.
For example: Out of reach of painted / polished furniture, upholstery, leather, etc.
• ALWAYS remove all cells and disconnect the power supply, if the charger is not in use.
• The device should not be operated by persons (including children) with reduced physical,
sensory or mental capabilities, or persons with lack of experience and knowledge, unless they
are supervised or have been provided with the instructions regarding the use of the device by
a person responsible for their safety.
• Keep the product out of the reach of children.
• The color of the product can vary from the picture. The producer reserves the right to change
the product and its appearance without prior notice.
• If the cells cannot be used anymore, please return them for recycling, as required by local
regulations.
• Please, do not charge the damaged cells, but return them for recycling, as required by local
Regulations.
• Never dispose of the cells / batteries by burning it in a fire or in other inappropriate manner.
• You can make a complaint only in case of faulty products. Eventual complaint of a new product
is to be solved even before unpacking.
• When making a complaint, the new product must be in original packing and unused..
TROUBLESHOOTING
Problem Possible cause Solution
On the display there
is displayed “BAD”
• A Zinc Carbon battery is used. • Check it please and replace.
• The cell is faulty. • Put the battery out of operation.
• Incorrect selection of battery type. • Check it, and switch to the
correct battery type.
• Microcontroller error. • Disconnect the charger from
power supply for 10 seconds
and then connect it again.
• The cell is inserted with incorrect • Check it and insert the
polarity. cell / battery correctly.
LEDs do not light • The charger is not power supplied. • Check if there is not power supply
outage and whether the charger is
correctly connected to power supply.
CLEANING AND MAINTENANCE
If necessary, the charger can be cleaned with a damp cloth.
When cleaned, the charger MUST BE disconnected from power supply.
DO NOT USE solvents or liquid cleaners as they can damage the finish of the equipment.
NOTIFICATION
• Pulse high-speed charging, eventually also discharging of NiCd and NiMH cells, only charging
of Li-Ion batteries and rejuvenation of alkaline batteries. Charger for from 1 up to 4 cells / batteries
of size AAA, AA, C, D, 9 V.
• Storage temperature for cells and batteries: from -20°C to + 30°C
• Operating temperature for charging: from 0°C to + 45°C
• Dimensions: 178 mm x 148 mm x 56 mm
Do not dispose of electrical appliances and batteries as unsorted municipal waste, use separate collection points of sorted waste.
For current information about these collection points, please contact your local authorities. If electrical appliances are stored in ordinary waste site, hazardous substances can leak into the groundwater, get into the food chain, and damage your health and the environment.
Be the first to review “~ RRP $120 ~ Universal Battery Charger of Non-Rechargeables and Rechargeables USB 9V AA AAA C and more Microprocessor-Controlled High-Speed Pulse Charger” Cancel reply
There are no reviews yet.